A Biosilification Fusion Protein for a ‘Self‐immobilising’ Sarcosine Oxidase Amperometric Enzyme Biosensor

Monomeric sarcosine oxidase (mSOx) fusion with the silaffin peptide, R5, designed previously for easy protein production in low resource areas, was used in a biosilification process to form an enzyme layer electrode biosensor. mSOx is a low activity enzyme (10–20 U/mg) requiring high amounts of enzyme to obtain an amperometric biosensor signal, in the clinically useful range <1 mM sarcosine, especially since the K_m is >10 mM. An amperometric biosensor model was fitted to experimental data to investigate dynamic range. mSOx constructs were designed with 6H (6×histidine) and R5 (silaffin) peptide tags and compared with native mSOx. Glutaraldehyde (GA) cross‐linked proteins retained ～5 % activity for mSOx and mSOx‐6H and only 0.5 % for mSOx‐R5. In contrast R5 catalysed biosilification on (3‐mercaptopropyl) trimethoxysilane (MPTMS) and tetramethyl orthosilicate (TMOS) particles created a ‘self‐immobilisation’ matrix retaining 40 % and 76 % activity respectively. The TMOS matrix produced a thick layer (>500 μm) on a glassy carbon electrode with a mediated current due to sarcosine in the clinical range for sarcosinemia (0–1 mM). The mSOx‐R5 fusion protein was also used to catalyse biosilification in the presence of creatinase and creatininase, entrapping all three enzymes. A mediated GC enzyme linked current was obtained with dynamic range available for creatinine determination of 0.1–2 mM for an enzyme layer ～800 nm.     

Downfalls of Chemical Probes Acting at the Kinase ATP-Site: CK2 as a Case Study

Protein kinases are a large class of enzymes with numerous biological roles and many have been implicated in a vast array of diseases, including cancer and the novel coronavirus infection COVID-19. Thus, the development of chemical probes to selectively target each kinase is of great interest. Inhibition of protein kinases with ATP-competitive inhibitors has historically been the most widely used method. However, due to the highly conserved structures of ATP-sites, the identification of truly selective chemical probes is challenging. In this review, we use the Ser/Thr kinase CK2 as an example to highlight the historical challenges in effective and selective chemical probe development, alongside recent advances in the field and alternative strategies aiming to overcome these problems. The methods utilised for CK2 can be applied to an array of protein kinases to aid in the discovery of chemical probes to further understand each kinase’s biology, with wide-reaching implications for drug development.     

The development and validation of a novel LC–MS/MS method for the quantification of cenicriviroc in human plasma and cerebrospinal fluid

A high-performance liquid chromatography tandem mass spectrometric method was developed and validated for cenicriviroc (CVC) quantification in human plasma and cerebrospinal fluid (CSF). The method involved precipitation with acetonitrile and injecting supernatants onto the column. Separation was achieved on an XBridge C₁₈ column with a gradient elution of 0.1% formic acid in water and acetonitrile. Analyte detection was conducted in positive ion mode using selected reaction monitoring. The m/z transitions were: CVC (697.3 → 574.3) and CVC-d7 (704.4 → 574.3). Calibration curve ranged from 5 to 1000 ng/mL for plasma and from 0.241 to 15.0 ng/mL for CSF. The intra- and inter-day precision and accuracy were <15% for both plasma and CSF across four different concentrations. CVC recovery from plasma and artificial CSF was >90%. The method was utilized for the measurement of patients’ plasma and CSF samples taking a dose of 50, 150 and 300 mg q.d.     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Rapid Discrimination of Crystal Handedness by X-ray Natural Circular Dichroism (XNCD) Mapping

An original method for determining the handedness of individual non-centrosymmetric crystals in a mixture using a tightly-focused, circularly polarized X-ray beam is presented. The X-ray natural circular dichroism (XNCD) spectra recorded at the metal K-edge on selected crystals of [Δ-M(en)₃](NO₃)₂ and [Λ-M(en)₃](NO₃)₂ (M=Co^II, Ni^II) show extrema at the metal pre-edge (7712 eV for Co, 8335 eV for Ni). A mapping of a collection of some 220 crystals was performed at the respective energies by using left and right circular polarizations. The difference in absorption for the two polarizations, being either negative or positive, directly yielded the handedness of the crystal volume probed by the beam. By using this technique, it was found that the addition of l -ascorbic acid during the synthesis of [Co(en)₃](NO₃)₂ resulted in an enantiomeric enrichment of the Λ-isomer of 67±13 %, whereas the Ni analogue was similarly, but conversely, enriched in the Δ-isomer (65±22 %).     

EBC-232 and 323: A Structural Conundrum Necessitating Unification of Five In Silico Prediction and Elucidation Methods

Structurally unique halimanes EBC-232 and EBC-323, isolated from the Australian rainforest plant Croton insularis, proved considerably difficult to elucidate. The two diastereomers, which consist an unusual oxo-6,7-spiro ring system fused to a dihydrofuran, were solved by unification and consultation of five in silico NMR elucidation and prediction methods [i.e., ACDLabs, olefin strain energy (OSE), DP4, DU8+ and TD DFT CD]. Structure elucidation challenges of this nature are prime test case examples for empowering future AI learning in structure elucidation.     

Spherical and tubular dimyristoylphosphatidylcholine liposomes

Journal of Thermal Analysis and Calorimetry - A physicochemical study of the interaction of pinocembrin with dimyristoylphosphatidylcholine (DMPC) liposomes was carried out. Unilamellar vesicles of...     

Electron transfer at different electrode materials: Metals,semiconductors, and graphene

Electron transfer reactions are the most important processes at electrochemical interfaces. They are determined by the interplay between the interaction of the reactant with the solvent and the electronic levels of the electrode surface. Theoretical treatments only based on Density Functional Theory calculations are not sufficient. This review emphasizes mainly the effect of the electronic structure of the electrode material on electron transfer under different kinetic regimes. Our goal is to understand experimental results in the framework of a theory valid for arbitrary strengths of electronic coupling.     

Intramolecular,Interrupted Homo-Nazarov Cascade Biscyclizations to Angular (Hetero)Aryl-Fused Polycycles

Herein, a SnCl₄-catalyzed intramolecular, interrupted homo-Nazarov cascade biscyclization to access angular (hetero)aryl-fused polycycles is reported. Subsequent decarboxylation of the readily enolizable products afforded the angular products in up to 71 % yield over two steps, with the trans-diastereomers as the major products. The cyclopropyl homo-Nazarov cyclization precursors were formed using a scalable and modular synthetic route that, ultimately, offers access to 6,6,6-, 6,6,5-, 6,5,6-, 6,6,5,6-, and 6,6,6,5-fused angular polycyclic products. To showcase the rigor and utility of the method, an 8-step total synthesis of (±)-1-oxoferruginol, an antibacterial aromatic abietane diterpenoid, was disclosed.